PelletMasters Pellet Mills, Hammer Mills, and Fine Grinders
Give us a call, we are here to help.
|
|
|
|
for Wood
|
for Feed and Fertilizer
|
for course material
|
for fine material
|
|
|
|
|
|
.
|
|
|
Products are intended for use with animal feed, fertilizer, and fuel production, but are not in compliance
with food grade for human consumption unless otherwise specified in the product description.
|
Pellet Mill/Hammer Mill Combination SPECIAL!
Buy a Pellet Mill and Hammer Mill together
and receive 10% off the cost of a Hammer Mill
|
|
PelletMasters Pellet Mills for Wood
All PelletMasters Pellet Mills suitable for wood will also produce pellets from softer materials,
at a slightly lower production rate than a pellet mill designed for feed and fertilizer.
Pellet Mill Working Principles: Raw material is placed into the feeding hopper, which
leads to the pellet mill head, where the rollers and die are located. Material should not
exceed ½ to ¾ the height of the rollers. Material will be forced by the rollers through the
die creating heat and creating pellets. Pellets will exit the pellet mill through the discharge
port and will fall with gravity into your container. With the correct recipe of heat, moisture,
and force (pressure), you should be making perfect pellets.
A conservative estimate of production rate for our Pellet Mills with a 6mm die hole size:
Electrically powered = ~20 pounds per horsepower per hour.
Gasoline, Diesel, and PTO powered = ~13 pounds per horsepower per hour.
Note: All new pellet mill dies must be conditioned before the first use.
Note: Raw material should be no larger than the die hole size. If your material is larger
than the die hole size, material will need to pass through a Hammer Mill first.
PelletMasters Pellet Mills ship with a standard 6mm die.
Other die sizes available from 3mm to 12mm depending on the model.
Other die sizes are available upon request and can be special ordered.
All additional dies ship free at the time of a purchase of a Pellet Mill.
220V Single Phase (1ph) Electric Pellet Mills for Wood
|
Take a look at our Pellet Mill/Hammer Mill Combination Deals!
(Click Here!)
|
Note: 220V single phase electricity is a standard in most residences.
Most electric ranges as well as electric clothes dryers utilize 220V single phase power.
|
Note: We would recommend running this on a minimum of at least a 60A circuit.
|
This is our own design and the only single phase flat die pellet mill designed for
making wood pellets out of 100% wood that we are aware of in the world.
|
|
Die Size |
Power |
Price |
Availability: |
9"-2R |
10hp 220V |
$5,495 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
220V Three Phase (3ph) Electric Pellet Mills for Wood
|
Take a look at our Pellet Mill/Hammer Mill Combination Deals!
(Click Here!)
|
Note: 220V three phase electricity is usually found only in commercial and industrial buildings.
|
|
|
Note: Demo machines must be picked up rather than shipped.
|
|
Die Size |
Power |
Price |
Availability: |
9"-2R |
10hp 220V |
$4,995 |
Ini Stock |
9"-2R |
10hp 220V |
$4,295 |
Demo/Used |
9"-3R |
15hp 220V |
$5,495 |
In Stock |
9"-3R |
15hp 460V |
$5,495 |
On Order |
12"-2R |
20hp 220V |
$7,495 |
On Order |
13"-3R |
30hp 220V |
$10,495 |
In Stock |
16"-3R |
40hp 220V |
$12,795 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
.
Take a look at our Three Phase Electric Wood Pellet Mill Deals!
(Click Here!)
|
|
|
|
Die Size |
Power |
Price |
Availability: |
8" |
7.5hp 220V |
$2,990 |
Demo/Used |
|
|
|
|
|
Back to Menu
Diesel Powered Pellet Mills for Wood
|
Note: Due to shipping regulations, Acid for Battery shown is not included.
|
|
Die Size |
Power |
Price |
Availability: |
9"-2R |
22hp Electric Start |
$5,595 |
In Stock |
9"-3R |
22hp Electric Start |
$6,295 |
In Stock |
12"-2R |
35hp Electric Start |
$9,995 |
In Stock |
13"-3R |
55hp Electric Start |
$12,995 |
In Stock |
16"-3R |
55hp Electric Start |
$15,995 |
In Stock |
16"-3R |
55hp Electric Start |
$14,995 |
Open Box |
|
|
Photos show 22hp and 55hp Diesel Engines.
|
|
|
|
|
|
Back to Menu
PTO Powered Pellet Mills for Wood
|
Take a look at our Pellet Mill/Hammer Mill Combination Deals!
(Click Here!)
|
Note: These are Category 2 with three point hookup and standard 540RPM.
|
Note: The PTO Pellet Mills comes with the PTO Shaft and connecting pins.
|
|
Model |
Minimum Power |
Price |
Availability: |
9"-2R |
15hp |
$3,495 |
In Stock |
9"-3R |
25hp |
$3,995 |
In Stock |
12"-2R |
35hp |
$5,995 |
By Request |
13"-3R |
45hp |
$6,995 |
In Stock |
16"-3R |
60hp |
$8,995 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
PelletMasters Pellet Mills for Feed and Fertilizer
Pellet Masters offers pellet mills and hammer mills in sizes ranging from
small mills suited to home owners wishing to cut their feed and/or fuel bills to larger mills
suitable for the small scale production of pellets.
Pellet Mill Working Principles: Raw material is placed into the feeding hopper, which
leads to the pellet mill head, where the rollers and die are located. Material should not
exceed ½ to ¾ the height of the rollers. Material will be forced by the rollers through the
die creating heat and creating pellets. Pellets will exit the pellet mill through the discharge
port and will fall with gravity into your container. With the correct recipe of heat, moisture,
and force (pressure), you should be making perfect pellets.
A conservative estimate of production rate for our Pellet Mills with a 6mm die hole size:
Electrically powered = ~20 pounds per horsepower per hour.
Gasoline, Diesel, and PTO powered = ~13 pounds per horsepower per hour.
Note: All new pellet mill dies must be conditioned before the first use.
Note: Raw material should be no larger than the die hole size. If your material is larger
than the die hole size, material will need to pass through a Hammer Mill first.
PelletMasters Pellet Mills ship with a standard 6mm die.
Other die sizes available from 3mm to 8mm depending on the model.
Other die sizes up to 12mm are available upon request and can be special ordered.
All additional dies ship free at the time of a purchase of a Pellet Mill.
Note: Actual mill color may vary.
220V Single Phase (1ph) and Three Phase (3ph)
Vertical Electric Pellet Mills
|
|
|
Take a look at our Pellet Mill/Hammer Mill Combination Deals!
(Click Here!)
|
Note: 220V 1ph electricity is a standard in most residences.
Most electric ranges as well as electric clothes dryers utilize 220V 1ph power.
|
|
|
|
Die Size |
Power |
Price |
Availability: |
5" |
4hp 1ph 220V |
$1,995 |
By Request |
5" |
4hp 3ph 220V |
$1,795 |
By Request |
6" |
5.3hp 1ph 220V |
$2,595 |
In Stock |
6" |
5.3hp 1ph 220V |
$2,395 |
Open Box |
6" |
5.3hp 3ph 220V |
$2,395 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
220V Single Phase (1ph) Electric Pellet Mills
|
|
|
Take a look at our Pellet Mill/Hammer Mill Combination Deals!
(Click Here!)
|
FREE SHIPPING on the 5" 4hp Single Phase Electric Pellet Mill! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
Note: 220V single phase electricity is a standard in most residences.
Most electric ranges as well as electric clothes dryers utilize 220V single phase power.
|
Note: The 5hp, 7.5hp, and 10hp single phase motors are locally sourced & American made motors.
|
|
|
|
Die Size |
Power |
Price |
Availability: |
5" |
4hp 220V |
$1,595 |
In Stock |
6" |
5hp 220V |
$2,990 |
By Request |
6" |
7.5hp 220V |
$3,675 |
By Request |
8" |
10hp 220V |
$4,390 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
220V Three Phase (3ph) Electric Pellet Mills
|
|
|
Take a look at our Pellet Mill/Hammer Mill Combination Deals!
(Click Here!)
|
FREE SHIPPING on the 5" 4hp Three Phase Electric Pellet Mill! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
Note: 220V three phase electricity is usually found only in commercial and industrial buildings.
|
|
|
|
Die Size |
Power |
Price |
Availability: |
5" |
4hp 220V |
$1,595 |
In Stock |
6" |
5.3hp 220V |
$1,985 |
In Stock |
6" |
5.3hp 220V |
$1,695 |
Demo/Used |
6" |
7.5hp 220V |
$2,260 |
By Request |
8" |
10hp 220V |
$2,750 |
In Stock |
9" |
15 hp 220V |
$3,590 |
By Request |
10" |
20 hp 220V |
$4,690 |
In Stock |
12" |
30 hp 220V |
$5,900 |
In Stock |
14" |
30 hp 220V |
$7,495 |
By Request |
16" |
40 hp 220V |
$10,995 |
By Request |
|
|
|
|
|
|
|
Back to Menu
Gasoline Powered Pellet Mills
|
|
|
Take a look at our Pellet Mill/Hammer Mill Combination Deals!
(Click Here!)
|
FREE SHIPPING on the 6" Gasoline Powered Pellet Mills! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
6.5hp Gasoline: Our supplier rates this engine as 7.5hp.
The engine is a 196cc clone of a Honda GX200, which Honda rates at 6.5hp.
|
13hp Gasoline: The engine is a 390cc clone of a Honda GX390.
|
|
Die Size |
Power |
Price |
Availability: |
5" |
6.5hp Pull Start |
$2,195 |
By Request |
6" |
6.5hp Pull Start |
$2,395 |
By Request |
6" |
13hp Pull Start |
$2,595 |
In Stock |
|
|
|
|
|
|
|
|
|
Back to Menu
Diesel Powered Pellet Mills
|
|
|
|
Die Size |
Power |
Price |
Availability: |
8" |
15hp Electric Start |
$3,990 |
In Stock |
9" |
22hp Electric Start |
$4,290 |
In Stock |
10" |
No Engine |
$3,995 |
In Stock |
|
|
Photos show 22hp Diesel Engine.
|
|
|
|
|
|
Back to Menu
PTO Powered Pellet Mills
|
|
|
Take a look at our Pellet Mill/Hammer Mill Combination Deals!
(Click Here!)
|
|
Die Size |
Minimum Power |
Price |
Availability: |
8" |
15hp |
$2,895 |
In Stock |
9" |
22hp |
$3,195 |
In Stock |
14" |
50hp |
$6,495 |
In Stock |
16" |
60hp |
$8,495 |
By Request |
|
|
|
|
|
|
|
Back to Menu
Non-Powered Shaft Drive Pellet Mills
|
|
|
|
|
Die Size |
Style |
Price |
Availability: |
8" |
Shaft w/frame |
$2,265 |
In Stock |
10" |
Shaft w/frame |
$2,965 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
Non-Powered Pulley Drive Pellet Mills
|
|
|
|
|
Die Size |
Style |
Price |
Availability: |
8" |
Pulley w/frame |
$1,995 |
In Stock |
9" |
Pulley w/frame |
$2,385 |
In Stock |
|
|
These machines use qty. 2 V-Belt size B.
|
|
|
|
|
|
Back to Menu
|
220V Electric and Diesel Powered
Fish Pellet Mills for floating fish pellets
|
Please contact Pellet Masters for more information and detailed quotes
regarding the larger Fish Floating Pellet Mills. Phone: 715-726-3100
|
The 5.3hp electric model 40 floating fish pellet machine produces about 60-80 pounds per hour.
The 7.5hp electric model 40 floating fish pellet machine produces about 160-200 pounds per hour.
The 15hp electric model 50 floating fish pellet machine produces about 240-300 pounds per hour.
The 15hp diesel model 50 floating fish pellet machine produces about 200-250 pounds per hour.
The 22hp diesel model 60 floating fish pellet machine produces about 240-300 pounds per hour.
|
Lead time is around 60-90 days. You can choose die sizes from:
0.9mm, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, & 12mm.
Additional dies are $80 (model 40), $95 (model 50), and $125 (model 60).
|
|
Die Size |
Power |
Price |
Availability: |
40mm |
5.3hp 1ph |
$4,995 |
By Request |
40mm |
5.3hp 3ph |
$4,695 |
By Request |
40mm |
7.5hp 1ph |
$5,695 |
By Request |
40mm |
7.5hp 3ph |
$5,295 |
By Request |
50mm |
10hp 3ph |
$5,695 |
By Request |
50mm |
15hp Diesel |
$5,995 |
By Request |
60mm |
15hp 3ph |
$5,995 |
In Stock |
60mm |
22hp Diesel |
$6,680 |
By Request |
70mm |
25hp 3ph |
Call |
By Request |
80mm |
30hp 3ph |
Call |
By Request |
|
|
|
|
|
Back to Menu
|
|
Large Pellet Mills
|
Please contact Pellet Masters for more information and detailed quotes
regarding these large ring die Pellet Mill lines. Phone: 715-726-3100
|
|
Die Size |
Power |
Price |
Availability: |
10" 1/3 t/hr |
30hp Electric |
$24,900 |
Demo/Used |
10" 1/3 t/hr |
30hp Electric |
$34,900 |
By Request |
22" 1 t/hr |
120hp Electric |
$59,900 |
By Request |
27" 2 t/hr |
215hp Electric |
$94,900 |
By Request |
|
|
|
|
|
Back to Menu
PelletMasters Fine Grinders
PelletMasters offers a line of grinders to reduce your materials to a smaller particle size
that our hammer mills are capable of. We offer grinders in varying sizes that are capable
of attaining particle sizes ranging from .4mm to 2mm.
Grinder Working Principles: Raw material is placed into the feeding hopper, which leads to
the grinder chamber where the material enters the side and is beaten and crushed (ground)
by high speed rotating pins on one side and stationary pins on the other side. Under
centrifugal force the material is processed quickly due to continuous squeezing, crushing,
and beating, by the grinder pins. Under rotor centrifugal force and gravity, crushed material
and air is discharged through the holes in the 360 degree screen while those that cannot
get through will repeat the process until they are small enough to pass through the screen
and out the discharge outlet where a dust bag should be used to collect it.
Note: Raw material size entering the Grinder depends on type of material.
PelletMasters Fine Grinders ship with 0.4mm, 0.6mm, and 1.2mm screens.
Other screen sizes available from 0.4mm to 6mm depending on the model.
Additional screens are $34.00 and ship free with the purchase of a Grinder.
Production rate for our Grinders varies greatly with the different screen sizes.
220V Single Phase (1ph) Electric Grinder
|
FREE SHIPPING on models 190 and 230 Electric Find Grinders! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
Note: 220V single phase electricity is a standard in most residences.
Most electric ranges as well as electric clothes dryers utilize 220V single phase power.
|
|
|
|
|
Power |
Screen Dia. |
Price |
Availability: |
3hp 220V |
190mm |
$1,395 |
In Stock |
4hp 220V |
230mm |
$1,795 |
In Stock |
4hp 220V |
230mm |
$1,595 |
Demo/Used |
|
|
|
|
|
|
|
Back to Menu
Gasoline Fine Grinder
|
FREE SHIPPING on the model 230 Gasoline Find Grinder! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
6.5hp Gasoline Pull Start: Our supplier rates this engine as 7.5hp.
The engine is a 196cc clone of a Honda GX200, which Honda rates at 6.5hp.
|
|
Power |
Screen Dia. |
Price |
Availability: |
6.5hp Gasoline |
230mm |
$1,795 |
In Stock |
|
|
|
|
|
|
|
|
Back to Menu
Stainless Steel Grinder
|
Stainless Steel Fine Grinders ship with a standard 100 mesh screen.
Other screen sizes available from 120 mesh to 10 mesh. Additional screens are $72.00.
All additional screens ship free with the purchase of a Stainless Steel Fine Grinder.
|
This model is made with food grade 304 stainless steel, but is not FDA Certified.
|
|
|
|
Power |
Screen Dia. |
Price |
Availability: |
7.5hp Single Phase |
230mm |
$6,495 |
In Stock |
7.5hp Three Phase |
230mm |
$6,495 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
Stainless Steel Grinder with Cyclone and Rotary Valve
|
Stainless Steel Fine Grinders ship with a standard 100 mesh screen.
Other screen sizes available from 120 mesh to 10 mesh. Additional screens are $72.00.
All additional screens ship free with the purchase of a Stainless Steel Fine Grinder.
|
This model is made with food grade 304 stainless steel, but is not FDA Certified.
|
|
|
|
Power |
Screen Dia. |
Price |
Availability: |
7.5hp Three Phase |
230mm |
$15,495 |
By Request |
|
|
|
|
|
|
|
Back to Menu
PelletMasters Hammer Mills
PelletMasters offers a wide range of hammer mills from small, perfect for the hobby farmer,
to larger models suitable for mid-sized industrial operations.
Hammer Mill Working Principles: Raw material is placed into the feeding hopper, which leads to the
hammer chamber where the material enters from the top and is beaten and crushed (hammered)
by high speed rotating blades. Under centrifugal force the material is processed quickly due to
continuous squeezing, crushing, and beating, by the hammer mill blades. Under rotor centrifugal
force, fan suction force, and gravity crushed material and air is discharged through the holes in
the 180 degree screen on the bottom while those that cannot get through will repeat the process
until they are small enough to pass through the screen into the lower body of the hammer mill.
Blower: After material passes through the screen into the lower body, fan suction from the blower
forces air and material out the discharge outlet (model 158) where a dust bag should be used to
collect it or upward and into the cyclone (all other models).
Cyclone Attachment: The material and air coming from the hammer mill blower enters the cyclone at the
top on the side. The material then falls in a circular motion through a downward vortex of the cyclone’s
outer chamber to the bottom where the material exits the cyclone. At the same time the clean air
flows through an upward vortex of the cyclone’s inner chamber to the top where it exits the cyclone.
A conservative estimate of production rate for our Hammer Mills with 6mm screens:
158 Hammer Mill = ~30 pounds (1/2 bushel) of shell corn per minute.
198 Hammer Mill = ~60 pounds (1 bushel) of shell corn per minute.
420 Hammer Mill = ~150 pounds (2 ½ bushels) of shell corn per minute.
Note: Raw material size entering the Hammer Mill depends on type of material.
PelletMasters Hammer Mills ship with 3mm, 4mm, and 6mm (installed) screens.
Other screen sizes available from 2mm to 12mm depending on the model.
Additional screens are $28.00 for model 158, $38.00 for model 198, and $49.00 for model 420.
All additional screens ship free with the purchase of a Hammer Mill.
Note: Actual mill color may vary.
220V Single Phase (1ph) Electric Hammer Mills
|
FREE SHIPPING on the model 158 Electric Hammer Mill! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
Includes 3mm, 4mm, and 6mm (installed) screens.
|
Note: 220V single phase electricity is a standard in most residences.
Most electric ranges as well as electric clothes dryers utilize 220V single phase power.
|
|
|
Note: Demo machines must be picked up rather than shipped.
|
|
|
Model |
Power |
Price |
Availability: |
158 |
3hp 220V 1ph. |
$1,695 |
In Stock |
158 |
3hp 220V 1ph. |
$1,495 |
Open Box |
|
|
|
|
|
|
|
Back to Menu
FREE SHIPPING on the model 198 Electric Hammer Mill! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
Includes
Cyclone Attachment and 3mm, 4mm, and 6mm (installed) screens.
|
Note: 220V single phase electricity is a standard in most residences.
Most electric ranges as well as electric clothes dryers utilize 220V single phase power.
|
|
|
Note: We do not ship Open Box or Demo/Used machines. They must be picked up.
|
|
|
Model |
Power |
Price |
Availability: |
198 |
4hp 220V 1ph. |
$2,395 |
By Request |
198 |
5.3hp 220V 1ph. |
$1,795 |
Demo/Used |
198 |
5.3hp 220V 1ph. |
$2,195 |
Demo/Used |
198 |
5.3hp 220V 1ph. |
$2,495 |
In Stock |
|
|
|
|
|
|
|
|
Back to Menu
Includes
Cyclone Attachment and 3mm, 4mm, and 6mm (installed) screens.
|
Note: 10hp 220V single phase motor is a locally sourced American made motor.
|
|
|
|
|
Model |
Power |
Price |
Availability: |
420 |
10hp 220V 1ph. |
$4,695 |
In Stock |
420 |
No Motor |
$2,995 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
220V Three Phase (3ph) Electric Hammer Mills
|
FREE SHIPPING on the model 198 Electric Hammer Mill! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
Includes
Cyclone Attachment and 3mm, 4mm, and 6mm (installed) screens.
|
Note: 220V three phase electricity is usually found only in commercial and industrial buildings.
|
|
|
Note: Demo machines must be picked up rather than shipped.
|
|
|
Model |
Power |
Price |
Availability: |
198 |
5.3hp 220V 3ph. |
$2,495 |
In Stock |
198 |
5.3hp 460V 3ph. |
$2,495 |
By Request |
|
|
|
|
|
|
|
|
Back to Menu
Includes
Cyclone Attachment and 3mm, 4mm, and 6mm (installed) screens.
|
Note: 220V three phase electricity is usually found only in commercial and industrial buildings.
|
|
|
|
|
Model |
Power |
Price |
Availability: |
420 |
10hp 220V 3ph. |
$3,495 |
By Request |
420 |
15hp 220V 3ph. |
$3,695 |
In Stock |
420 |
No Motor |
$2,995 |
In Stock |
500 |
30hp 220V 3ph. |
$6,295 |
In Stock |
|
|
|
|
|
|
Back to Menu
Gasoline Powered Hammer Mills
|
FREE SHIPPING on the model 198 Gasoline Hammer Mill! (Contiguous U.S.)
Receive a $100 discount for local pick-up.
|
Includes
Cyclone Attachment and 3mm, 4mm, and 6mm (installed) screens.
|
6.5hp Gasoline Pull Start: Our supplier rates this engine as 7.5hp.
The engine is a 196cc clone of a Honda GX200, which Honda rates at 6.5hp.
|
Note: We do not ship Open Box or Demo/Used machines. They must be picked up.
|
|
|
Model |
Power |
Price |
Availability: |
198 |
6.5hp Gasoline |
$2,495 |
In Stock |
198 |
6.5hp Gasoline |
$2,195 |
Open Box |
|
|
|
|
|
|
|
|
Back to Menu
Diesel Powered Hammer Mills
|
Includes
Cyclone Attachment and 3mm, 4mm, and 6mm (installed) screens.
|
Note: 22hp and 55hp Diesel motors are equipped with electric start.
Note: Photos show model 420 Hammer Mill measurements and size.
Note: Due to shipping regulations, Acid for Battery shown is not included.
|
|
|
Model |
Power |
Price |
Availability: |
420 |
22hp Diesel |
$4,195 |
In Stock |
500 |
55hp Diesel |
$8,495 |
By Request |
|
|
Photos show 22hp Diesel Engine.
|
|
|
|
|
|
|
|
Back to Menu
PTO Powered Hammer Mills
|
Includes
Cyclone Attachment and 3mm, 4mm, and 6mm (installed) screens.
|
Note: Requires at least a 22hp PTO for operation.
|
|
|
Model |
Power |
Price |
Availability: |
420 |
PTO |
$2,795 |
In Stock |
|
|
|
|
|
|
|
Back to Menu
PelletMasters Spare Parts
PelletMasters offers a wide range of Spares and Replacement Parts
PelletMasters Pellet Mills and Hammer Mills ship with standard 6mm dies and screens.
Other die and screen sizes available from 2mm to 10mm depending on the model.
Additional die and screen costs very depending on the size and model of the mill.
All additional dies and screens ship free with the purchase of a Mill.
Spare and Replacement Parts
|
Call for costs and availability.
|
|
|
|
Back to Menu
Packaging and Delivery
Our machines are packaged securely to a strong plywood case with a pellet securely
fastened to the base for easy loading and unloading.
Industrial Machinery
These are industrial machines. They are internally wired up and ready to go, but are not wired up for
your specific power receptacle because of the many different options available. You will be able to
use whichever plug and receptacle you choose in accordance with the power required by the machine.
Warranty and Returns
We stand behind our products. If you ever have any problems, we are here to answer the phone.
We carry a large inventory of alternate and general maintenance replacement parts.
If for some reason you receive your machine and it isn't what you expected or you changed your mind,
leave it in the crate and send it back for a full refund less shipping costs both ways.
Be Careful and Follow All Safety Guidelines!
Pellet Masters in beautiful Chippewa Falls, Wisconsin.
We have an office and shop in downtown Chippewa and a warehouse a few miles away.
Chippewa Falls is also the home of the Leinenkugel Brewing Company and Cray Research Inc.
We have the largest in stock selection of flat die pellet mills in North America
with over 300 machines ready to ship from our warehouse in Chippewa Falls, Wisconsin.
